Chocolate Line 2 - Tunnels
Parts Reference:
PLC / Controls
PLC System:
| CPU | Module 1 | Module 2 | Module 3 | Module 4 | Module 5 | Module 6 | Module 7 | Module 8 |
|---|---|---|---|---|---|---|---|---|
| CPU | name | name | name | name | name | name | name | |
| C01D-RD | part # | part # | part # | part # | part # | part # | part # |
| Application | Manufacturer | Vendor | Vendor Part # |
|---|---|---|---|
| Output relays | Automation Direct | Automation Direct | XXXXXXXX |
| XXXXXXXX | Automation Direct | Automation Direct | XXXXXXXX |
| XXXXXXXX | XXXXXXXX | XXXXXXXX | XXXXXXXX |
Tunnel Belt Sensors
(NOTE: The sensors on Tunnel 1, Infeed end, are a new laser sensor that we're testing. (FALS-BP-1E ) The below information does not apply to them.)
NOTE: All belt sensors are now blue plastic Telemecanique sensors. They are now universal, meaning there are NOT separate configurations for the tracking and tracking failure sensors. All sensors will be set to have normally open contacts.
NEW Belt-tracking photosensors (conveyor tunnel belts)
| Application | Manufacturer | Vendor | Vendor Part # |
|---|---|---|---|
| ALL Belt Sensors | Telemecanique | Allied Electronics | XUB0APSNM12 |
(NOTE: The Telemecanique XUB0APSNM12 must be "trained" before use.)
Note that the sensor has the following lights:
GREEN (power), YELLOW (sensing), and RED (error).
Guillotine
Guillotine Pneumatic parts
Air Cylinder: NRG EA7R77B6-2.50X3.00-N(33)_MTO CYLINDER
(Vendor - Kaman Industrial technologies)
Piston rebuild kit: NRG EJK-253_2.5 BMP PSK
Note: There is no Rod Seal rebuild kit, so you will need:
O-ring: 2-218
Wiper: H-1000
(Vendor - Epic Industrial)