Chocolate Line 2 - Tunnels

Parts Reference:

PLC / Controls

PLC System:

CPU	Module 1	Module 2	Module 3	Module 4	Module 5	Module 6	Module 7	Module 8
CPU	name	name	name	name	name	name	name
C01D-RD	part #	part #	part #	part #	part #	part #	part #

Application	Manufacturer	Vendor	Vendor Part #
Output relays	Automation Direct	Automation Direct	XXXXXXXX
XXXXXXXX	Automation Direct	Automation Direct	XXXXXXXX
XXXXXXXX	XXXXXXXX	XXXXXXXX	XXXXXXXX

Tunnel Belt Sensors

(NOTE: The sensors on Tunnel 1, Infeed end, are a new laser sensor that we're testing. (FALS-BP-1E ) The below information does not apply to them.)
NOTE: All belt sensors are now blue plastic Telemecanique sensors. They are now universal, meaning there are NOT separate configurations for the tracking and tracking failure sensors. All sensors will be set to have normally open contacts.

NEW Belt-tracking photosensors (conveyor tunnel belts)

Application	Manufacturer	Vendor	Vendor Part #
ALL Belt Sensors	Telemecanique	Allied Electronics	XUB0APSNM12

(NOTE: The Telemecanique XUB0APSNM12 must be "trained" before use.)
Note that the sensor has the following lights:
GREEN (power), YELLOW (sensing), and RED (error).

Guillotine

Guillotine Pneumatic parts

Air Cylinder: NRG EA7R77B6-2.50X3.00-N(33)_MTO CYLINDER
(Vendor - Kaman Industrial technologies)

Piston rebuild kit: NRG EJK-253_2.5 BMP PSK

Note: There is no Rod Seal rebuild kit, so you will need:
O-ring: 2-218
Wiper: H-1000
(Vendor - Epic Industrial)