Carle & Montanari (C&M) CM-Y55CF Wrapper (Old)
For Current Wrappers, reference CMFIMA Wrapper (New), Y55 CF3
Sensor Wiring
Foil Feed:
(Machines 1-5 only)
| Pin # | Wire Color | Wire # |
|---|---|---|
| 1 | brown | 300 |
| 2 | blue | 301 |
| 3 | black | 323 |
Foil Feed:
(Machine 6 only)
| Pin # | Wire Color | Wire # |
|---|---|---|
| NA | blue | 301 |
| NA | red | 310 |
| NA | orange | 323 |
Vibrator Control:
| Pin # | Wire Color | Wire # |
|---|---|---|
| 1 | brown | 300 |
| 2 | blue | 301 |
| 3 | black | 323 |
Foil Jam:
| Pin # | Wire Color | Wire # |
|---|---|---|
| 1 | brown | 300 |
| 2 | blue | 301 |
| 3 | black | 322 |
Parts
Sensors, Internal:
| Application | Manufacturer | Part Number | Descr. |
|---|---|---|---|
| Foil Feed (#1-5 only) | Allen Bradley / Omron | 872C-D4CN12-E2 / E2E-X2E2 | NPN, N.C., 12mm D, 4mm sense, unshielded, 2M cable |
| Foil Feed (#6 only) | ??? | WT18-2P112-1012 887 700R | |
| Vibrator Control | Allen Bradley | 872C-D4CP12-E2 | PNP, N.C., 12mm D, 4mm sense, unshielded, 2M cable |
| Foil Jam | Allen Bradley | 872C-D3NP12-E2 | PNP, N.O., 12mmD, 3mm sense, shielded, 2M cable |
| Foil Jam (Alternate) | Allied Electronics | 70008259 | PNP, N.O., 12mm D x 41mm L, 2mm sense, M12 conn. |
Sensors, Misc.:
| Application | Manufacturer | Part Number | Descr. |
|---|---|---|---|
| Gate opening (old) | McMaster Carr | 9231K22 | Light Beam Sensing Switch with Relay Output, Time Delay, Reflector Style |
| Gate opening (new) | Automation Direct | QMIS-0P-0F | PNP, NO/NC, 30 - 400 mm sense, M8 conn. |
Foil Jam cable connector: Allied Electronics Part# 70124309
Conveyor Gate Parts for new wrappers: Sensor Cable: Automation Direct EVT421 Air Valve: Automation Direct AVS-5312-24D
Drive Motor Brushes: Helwig 11-506231 Counter: Veeder Root 79998D-110 (Allied Electronics P# 70132871)
Replacing Roca Counter
Mechanical: Remove and discard the larger plastic faceplate. Place the smaller, thin bezel over the counter, and install into machine. Slide the retainer onto the back of the counter to retain it.
Electrical: Cut off the Blue and Yellow wires flush with the connector body; they are not used. The Black and Green wires will get connected together, then to one of the wires in the C&M, (color may vary). The Brown wire will get connected to the other wire in the C&M, (color may vary).
Replacement Allied Electronics Allied Electronics part# 70132871.
Return to --> List of Machinery